Saturday, June 9, 2012

Steelhead Fishing Techniques




You have all the gear you need to head out on the river and start pulling in that steelhead. However, what are you going to use for bait or to hook them and just how are you going to fish for them?

You have a number of ways that you can fish but each will require their own special gear.
Drift fishing for steelhead may be the most common method used when steelhead fishing.
It requires the least amount of gear since all you need is a weight/sinker and a hook. Drift fishing produces steelhead for anglers on a steady basis also. However, drift fishing does require that an angler learn how to read the river and they will need to realize just what a bite feels like. Although the steelhead is large and aggressive fish, their bite can be quite difficult for the beginning angler to detect. Even after forty years of fishing, they still surprise me from time to time.

For the beginning angler there are two ways that I recommend for them to try when first starting out. Jig fishing or plunking for steelhead are easy productive ways of fishing. Jig fishing with a bobber or float is the most productive way I have found for the novice angler to start catching fish.
  • The bite is easy to detect since you watch your float and when it goes down you set the hook.
  • You do not have to worry about getting snagged, and spend all your time tying on new rigs.
  • You can watch your float and know exactly where you jig is at, making it easier to find the seams in the river.
  • It is one of the best ways an angler can fish deep slow moving pools, I use this method on a number of hole that I would not be able to fish other wise.
Plunking is a style of fishing just as its name implies. You set up a rig, and plunk it out in the river and wait for a steelhead to come along and take your offering. Plunking too can be very productive under the right circumstances. Learning when and where to use this method will take some experience however. Unless some one has shown you, a good place and time to try this method you will be better of using the float and jig as it will produce fish through out the season.

Using a side planner along with a hotshot lure or something similar is an exciting way to catch steelhead also. Here again you need to know how to read the river and have some idea of where a steelhead will lay or travel through. Once you learn how to set this up and fish it correctly, it will produce fish on days when nothing else will work.

I should mention here that fly-fishing for steelhead might not be the most productive method of catching steelhead it for sure is the most exciting and we ill be covering fly-fishing in later articles also. For those of you that would like to give fly-fishing a try you will need to have lots of patients and strong determination; however, the rewards are well worth the effort once a steelhead is on your line.

If you have access to a boat then trolling, back trolling, back drifting, are some of the other ways you can fish. If you do not have a boat do not worry as a majority of the steelhead we catch are from the bank. Even when we have had use of a boat, we often find ourselves beaching the boat so we can fish a hole from shore. I would be the first to say a boat is nice to have at times; however, they are not a necessary item to catch steelhead.

Learning what technique to use, and when to use it, comes with experience and we will be covering each of these in detail in the coming days. We are going to be talking about what type of gear you will need for each technique, show you how to set it up, where to use it, and how to seek out those holding spots where steelhead just love to lay.
Until Next, time The Steelhead Angler.

Steelhead, Salmon and Trout Fishing has been a passion of mine since I was a young boy. Most of my free time was spent on lakes and streams here in the northwest, and I have picked up on some interesting facts about fishing for these species over the last 45 years. I would like to share them with you through articles and at my websites I hope you find them helpful and enjoyable. So please stop by check out some information or just stock up on your fishing gear. Hope to see you on the river! RR Smith

[http://www.steelheadangler.savings-direct.com] For all your Steelhead/Salmon fishing needs
Article Source: http://EzineArticles.com/?expert=Robert_R_Smith

Article Source: http://EzineArticles.com/1917828

Sunday, April 29, 2012

World Class Salmon Fishing Spots



 
The problem with finding a great fishing spot is that once it's discovered the word quickly gets out and your little secret turns into a tourist trap. Many avid anglers have a tough time deciding where to spend their weekends or fishing vacations so they can still find abundant fish and not feel like they are crossing paths with everyone else. Fortunately for fishermen there are several North American hot spots for both salmon and steelhead fishing in the Pacific Northwest, primarily in the state of Oregon.

The Rogue River in Oregon's southwest region flows nearly 215 miles from the Cascade Range to the Pacific Ocean. Rogue is one of the original eight rivers to be protected under the landmark Wild & Scenic Rivers Act of 1968.

This important piece of legislation recognizes the Rogue River for possessing preservation values including outstanding and remarkable scenery, abundant fish and wildlife and recreational uses. It also prevents the river from being damned or otherwise impeded. Because of this the salmon runs on the Rogue River are some of the best in the world and no matter how many people come to fish the river there is plenty of room on the 215 mile course for everyone.

Historians estimate that people have been living near and fishing from the Rogue River for over 8,500 years. The resources of the river were so valued that several wars broke out in the middle 1800's between settlers and Native Americans for control of the river basin. During the early 20th century several dams were constructed to generate electricity and control stream flow. These dams were slowly phased out to allow for greater amounts of sea-going fish including salmon.

Today the Rogue River is a thriving tourist attraction for fishing, whitewater rafting and camping. In addition to amazing amounts of salmon the Rogue River also features rainbow trout, cutthroat trout, brook trout and brown trout. Between Lost Creek Lake and Grants Pass are major fisheries for spring and fall Chinook salmon, Coho salmon from hatcheries, summer and winter steelhead and large rainbow trout. The inland stretches of the river have abundant salmon and trout species but along the lower portion of the river are opportunities to reel in perch, lingcod and crab.

With the breathtaking scenery, pristine camp grounds and abundant fishing the Rogue River is the perfect location for a day, weekend or week-long vacation. Many places along the river rent out boats for fishing excursions though some areas of the river are closed to jet boats and motor boats. These sections, mostly along the lower 15 miles, are great for the seasoned angler who likes privacy and quiet when spending the day casting for world class salmon.

For great deals on rafting, fishing and camping vacations in Oregon contact Rogue Klamath and see nature the way it was intended.
Article Source: http://EzineArticles.com/?expert=Kevin_McLaughlin

Article Source: http://EzineArticles.com/3786774

Saturday, April 21, 2012

Salmon Fishing Rods - Choosing The Right One





Setting up for a fishing adventure doesn't mean focusing only on where you sink your line or how pretty the weather is although those things are equally important. Salmon fishing gear is important, of course, and you will want to make sure that you take all gear into consideration. Equipment such as salmon fishing rods, salmon fishing reels , the type of line and leader that you are going to use will be most important while terminal tackle such as hooks, baits and lures, will be secondary.

Because of the variety in species of salmon as well as their many habitats, there are an infinite number of combinations that can be made to produce your ideal salmon fishing setup.

While salmon fishing tackle is available at many different rod and gun shops, not just those on the ocean but also those inland, it's more convenient to learn about these things before you go ahead and purchase items. Lets take a look at some of the tackle you will need for a successful day out there.

Common tackle
Rods, reels, weight's, swivel's and salmon fishing line and leader are going to be your basic tackled needs on any salmon fishing excursion, whether on the ocean or in freshwater, casting or trolling. In all cases, your line is going to have to be of a good braid variety or "test" expensive braiding brands are often referred to as super lines. These lines are good for casting, but when it comes to actually landing the fish, results can vary from company to company. For trolling in clear water, many anglers choose clear monofilament or fluorocarbon line. The unfortunate thing about salmon fishing is that if one of these big fish manages to snap your line, you are out some pocket money, not only for the line itself but also for any lure and attractant tackle that you happen to be using (and your bobber if you are bob or float fishing!). All that and nothing to show! Make sure your line is endorsed by fellow anglers before trying it out on the water.

Common Saltwater Tackle and Gear
Different types of salmon fishing are going to call for different gear. Any ocean salmon fishing is going to mean that the salt water takes its toll on your equipment, and we're not just talking your basic gear; if you fish in a boat, you are going to have to have your motor checked constantly- some estimates put the turnover rate for an inboard motor on the ocean at seven years. This can really add up, but there are tricks, like using fresh water coolant, that can help add life to your motor.

Ocean fishing for salmon, whether from a boat (mooching, trolling, or drift fishing) or from the shore requires some very specific salmon fishing tackle. You need hooks and weights that get the line down to the level that you want, but that also don't pick up a lot of kelp on the way in. Bottom bouncers and lures work great for casting from a wharf or from the shore, and packed roe is one of the most successful baits. Remember that baits and lures for salmon are always based on smaller fish; bugs won't get you a lot of bragging rights at the end of the day when it comes to salmon, unless you're talking crawfish which are commonly referred to by anglers as bugs.

As far as tackle and gear composition goes, it's a must to pay close attention to detail. Fishing rods and fishing reels should be made of a material that does not corrode, such as aluminum (common in high end reels), stainless steel, graphite (this is the most popular material in ocean fishing rods), plastic, or good old wood. Don't use equipment that is made of mixed metals; different metals will react in different ways to the salt content, and you could end up with a reel or rod that is 25% corroded; it will look fine for the most part but it won't work.

Salmon fishing tackle considerations such as lures and bait will depend on the type of fishing you are engaging in. Fishing for salmon on the ocean will mean a lot of trolling. You will want a setup of rod, reel, and line appropriate for trolling, preferably one that can shake or flip piles of seaweed off so that the weight of the fish on the other end isn't compounded by the weight of debris. The bait on the line is usually going to be a fish simulating device, perhaps with a few spoons to catch the eye of the salmon. Plugs are also common on the ocean when salmon fishing. It's important to check regulations for the area you are fishing so that you don't use a hook/lure combination that is illegal (years ago quadruple hooks were common, but regulation has meant that double hooks are now the norm in fish-like lures).

Freshwater Salmon Gear
Freshwater salmon fishing will usually mean the use of floats and live bait such as roe or prawns. This might sound like a tame way to fish, but it can be quite a rush to see that float sink in the river and realize that it might not just be a rock, but a massive Spring salmon on the end. Check the rod quick, because you will want to hook the fish before he realizes what is going on. This is done by a quick firm jig or set towards you. Slowly let your tip back towards the river with the current keeping some tension on the line, and if it keeps going down, give it another real good jig and yell fish on if you've got something
Casting, in freshwater can be one of the most rewarding salmon fishing experiences, especially when the costs are weighed against those incurred fishing from a boat. The tricky part can be in determining the right kind of flies or lure's; in fact, the only type of salmon that is really going to bite on a fly are Steelhead or Coho. The flies you are going to be successful on for steelhead will depend on whether the fish are winter or summer run, and of course the kind of bugs that are around the river or stream you are casting on. The real challenge in casting for steelies is just getting the fish to bite on any flies at all. If you decide to use a lure or blade, this is a very productive way to fish for a wider range of salmon and can be used in both saltwater and freshwater.

Bottom bouncing is also a casting method used in a river system and involves lots of casting. In these methods, live bait, synthetic worms and wool are the weapon of choice by most anglers. When targeting Coho or steelhead a smaller rig is used as these fish can be easily spooked off of a huge and intimidating set-up. A couple of split-shots (or small amount of lead) and a nice compact presentation that is stealthy will work well for you for these two species. If your out for the Spring or Sockeye in a large river system like B.C.'s Fraser, or the Columbia, you're more likely to use a larger bouncing betty and some wool while you "floss" the mouth of the King salmon, as these fish moving up the river to spawn are going to be attacking your line rather than biting it because they want to feed. Flossing is a productive way to fish that brings a good table fare, but uses much less skill than other methods and some anglers disapprove of this method.

Tip; on buying bottom bouncing weights:
Excalibur is a leading manufacturer of bouncing betty type weights that are in the midst of lead weight replacement, which is harmful to the environment. These environmentally safer weights use Tungsten nickel alloys and are 25% smaller, denser and more rigid, which means longer life, less likely to damage lines and more effective in river systems as they transmit a better bounce to the line! VERY COOL!

Specific Tackle
Choosing A Salmon Rod
As far as rods go, seven feet long rods for trolling seem to be the most recommended. The base of the rod should be able to handle a lot of weight; if you are fishing the Pacific waters in particular, you need a rod that can handle the possibility of a 50lb Tyee on the other end. Lightweight and flexible material is essential for ensuring a successful battle.

Salmon Reels
Reels for salmon fishing are usually spinning or baitcasting reels. They need to have smooth drag systems and should keep the actual act of reeling thoughtless. The tension between fish and reel should be smooth and not a jarring tension that can cause the line to snap. Since you will want to concentrate on the fish on the other end and not the actual reeling process, drag becomes very important when deciding which reel is best for you.

Salmon Fishing Line
There are different schools of thought when it comes to the right type of fishing line to use as far as your salmon fishing tackle is concerned, but in most cases the more expensive line is the best option because as my dad always said "you get what you pay for."
Now, it doesn't have to be the MOST expensive fishing line on the market, but higher priced lines tend to be best for clear water fishing; the less visible line will not spook a fish off of your bait. More expensive lines are also more resistant to breaking, kinking, and tangling. More times than none you are going to be paying for a new technology as the older technologies move by the wayside.

Just remember that good salmon fishing tackle is essential when it comes to having a good fishing trip. Something as simple as the proper Salmon fishing line and leader will make all the difference and If everything goes right, you will be able to break out those salmon recipes on your return home!

Information to help guide you to purchasing the proper salmon rod. Read our buyers guides for all kinds of tackle and salmon rods at Go Salmon Fishing.com
Article Source: http://EzineArticles.com/?expert=Duff_Gillmore

Article Source: http://EzineArticles.com/889189

Sunday, April 15, 2012

America's Top Ten Trout Fishing Streams



I'm going seriously out on a limb by naming the top 10 trout rivers in the country. I will doubtless leave out some rivers that are worthy of mention. But when it comes to a list like this, you have to eventually pick the streams, and I'll apologize in advance if I don't put you're favorite river down. I'm sure these aren't actually the ten very best streams around-there are dozens of backcountry Alaskan streams and private trout waters that are probably better than any of these. But these are all rivers that are easily accessible and provide awesome trout fishing. These are all well known streams, and they'll be crowded from time to time. Still, they're all long rivers and there is room to spread out. It's no coincidence that Montana is well represented in the list;it is full of long, beautiful trout rivers.

1. Gallatin River (Yellowstone National Park and Montana)

This will come as a bit of a surprise that I'm listing this as #1. It's one of those streams that everyone loves, but usually plays second fiddle to other famous rivers in the Yellowstone area. Most folks spend most of their trip on the really "classy" trout streams, like the Madison, Yellowstone, Firehole, or the Paradise valley spring creeks. The Gallatin is just that friendly little river that courses through gorgeous mountain territory and produces some small trout. The beautiful mountain meadow water in Yellowstone National Park, and for a few miles below holds several hundred small rainbows and cutthroat in it's plentiful riffles. You won't find the thousands of trout per mile that you'll find on the Madison, or the 20" browns, but it doesn't get any more beautiful and the fish usually aren't at all fussy. Access is easy and ample. Downstream, it gains power and roars through a whitewater canyon. It's no longer an easy going meadow stream, but the trout numbers, and size of the fish, get steadily better. Below the canyon, the stream spills out into a wide sagebrush valley populated by elk and moose. Especially below the mouth of the East Gallatin, big browns begin to show up in good numbers under the undercut banks. This is good float fishing water, although waders can do well also. Finally, the Gallitin finds it's way to Three Forks where the it helps form the mighty Missouri. The Missouri itself is an awesome trout stream, and it's the next stream on our list.

2. Missouri River (Montana)

The Missouri River begins as a high plains river at Three Forks, Montana. From the river's headwaters downstream to Holter dam, the river flows slowly, both as a free-flowing river and as reservoirs. This portion of the river has some excellent trout fishing during the spring and the fall. The fish here are almost all browns, although a few rainbows come up from the lakes that are located on the river. During the summer, whitefish form most of the action. Browns can still be caught, but they mostly become sluggish, or even move to the deep waters of the lakes.
Below Holter Dam, the Missouri becomes a tailwater stream. This is where most people go to fish the Missouri. The cold outflow from Holter Dam creates a habitat where trout can survive well throughout the year. Rainbows are much more common than further upstream, but browns are also present. The fishing remains excellent downstream to Cascade;it fishes decently all the way to Great Falls.

3. Madison River (Yellowstone National Park and Montana)

The Madison River begins as an odd spring creek in Yellowstone National Park. The reason it is so odd is that it is fed by both cold and hot springs that make their way into it's two feeder streams, the Firehole and Gibbon. It fishes best in this upper portion in the late spring, early summer, and fall. During the summer, the water often grows too warm to allow the trout to feed, because of the hot springs. Rainbows and browns in the 10-14" range are the primary residents,but in spring, large rainbows move up from Hebgen Lake. In the fall, large browns, also from Hebgen, do the same. Dry flies are standard fare for the residents. The migratory rainbows and browns prefer gaudy streamers and wet flies fished deep.

Below Hebgen Dam, there is a run of a few miles before the Madison slows back down into Quake Lake. There is a resident trout population in this stretch which is augmented by spawning runs from Quake Lake during the spring and fall. The summer fishery is somewhat better than the river above Hebgen, but the spring run of rainbows, and the fall run of browns are still the main event. Below Quake Lake, the Madison becomes a beautiful freestone trout river. It begins a run to Ennis Lake known as the 100 mile riffle. This is all fast water, but serious rapids are rare. Rainbows and browns hold in the slow water along the banks, as well as behind the many mid-stream boulders. The scenery is breathtaking, with the lush Madison valley in the foreground, and the towering mountains of Yellowstone in the background. This is the 100 most fabled miles of trout water in the country, and possibly in the world. It can be floated or waded.

Below Ennis Lake, the river drops into Beartrap Canyon. The canyon is full of big rainbows and browns, but it's a long hike to get to the river. Still, it's probably worth it, as this relatively unfished water provides nearly as good of fishing as the water above Ennis. Below the canyon, the river drops into an arid valley, where it meanders from one undercut bank to another. This is excellent brown trout water, but it gets too warm in the summer. Spring and fall are good times to target the good numbers of browns here.

4. Yellowstone River (Yellowstone National Park and Montana)

Yes, this is the fourth Montana stream on the list. The Yellowstone simply can't be left out of any list of top trout waters, as it provides 250 miles of some of the most beautiful and heartstopping trout fishing in the world. The fishing begins deep in the Thoroughfare region of Wyoming. There's no easy way to reach this water. It take's a long hike and a dedication of a week or so to fish this water the way it should be fished. This is cutthroat water, with both resident fish and migratory trout from Yellowstone Lake. This is as deep in the wildnerness as you can get in the lower 48, and you must be sure you can be totally self-sufficient. In the case of an accident, you'll be on you're own. Also, Grizzlies, black bear, moose, and other dangerous creatures are common. That can be a deterrent or an attraction. You decide for yourself.

The river is much more civilized below Yellowstone Lake. Although it flows through country that has been left in it's natural state by Yellowstone National Park, it's far from wild. The park water is heavily fished, especially in the popular Buffalo Ford area. Cutthroat trout fishing isn't as glorious as it used to be, but it's still quite good. The river drops into the Grand Canyon of the Yellowstone, and then the Black Canyon. Those stretches are essentially unfishable. When it enters Montana, it once again becomes a great trout stream. It is a very readable mountain stream just below the park, with many pools and riffles that hold both rainbows and cutthroat. Below, it enters yet another canyon, this one called Yankee Jim. The canyon is hard to hike into, but the pocket water holds some rainbows, and they aren't fished very often.
Below Yankee Jim canyon, the Yellowstone settles into the character it will hold for another hundred miles or so. It flows through a beautiful valley (although you can see the beautiful Absaroka Mountains most of the time), and the river has a steady, but not rapid current. This is rainbow and brown trout water in the main, although cutthroat are pretty common as well. The water around Livingston is most famous, but the fishing is very good for many miles up and downstream from that popular western trout town. The trout fishing holds up all the way downstream to Billings in Eastern Montana. Below there, it is a massive prairie river home to pike, smallmouth bass, and catfish, but few trout.

5. Green River (Wyoming and Utah)

 The Green River is a stream with many faces. In it's upper reaches in Wyoming, it's a high plains river home to large brown trout. This is western ranchland country, and all through the summer trout hug the undercut banks in search of hoppers. That's where you should be casting, with a Letort Hopper and maybe a Hare's Ear dropper for good measure. The access isn't great here, but there are places where visiting anglers can get on productive water for free.
The upper Green finally flows into Flaming Gorge Reservoir. The reservoir is home to big rainbow, brown, and lake trout, but it's deep waters are hard to handle with conventional tackle, especially if you prefer to fly fish. The tailwater (which is actually in Utah), however, has some of the best trout populations on Earth. Some estimates show nearly 20,000 trout per mile in the first 7 miles below the dam. The tailwater is best known for it's cutthroats, but it also fishes well for rainbows and browns. This river flows through a beautiful desert canyon. The water is air-clear, and site fishing is very popular. Further down, there are a few less trout, but the browns and rainbows can grow much larger. If you don't have a boat, we recommend hiking in to some of the lesser known areas. You'll find wilderness fishing on one of the most productive trout streams in the country. Local fly and tackle shops will be able to point you in the right direction. Just watch out for Rattlesnakes! There are also formal accesses where you can fish, including one right below the dam. You can catch fish in these areas, but the wilderness experience is mostly lost. Most people who are new to the Green float it in a driftboat with a guide. The guide will safely bring you through the whitewater and put you over fish. Just don't expect it to be cheap.

6. White River-Bull Shoals Tailwater (Arkansas)

Arkansas's White River is the only Southern stream on our list, and it's also the only one that's mostly put and take. This tailwater flows out of Bull Shoals Dam high in the Ozark Hills. The cold plume from the bottom of Bull Shoals Lake, combined with the cold flows of the North Fork River allow trout to survive for nearly 100 miles below the dam. It's a tailwater with rapidly fluctuation flows, and it can be downright dangerous. It can be waded at low flows, but bank and boat fishing are the only options when there the dam is releasing a lot of water. Your first time floating, a guide will be helpful.
There are about 5000 trout per mile on the river, and the majority are rainbows. Rainbows are stocked by the millions by the Arkansas Game and Fish Commission. Rainbows swarm almost all parts of the river, and they never seem to be difficult to catch. These trout average about 13 inches, so they're fun to catch. Still, the browns are what draw many anglers to the White. The browns are mostly wild, although their numbers are supplemented by stocking. A new 24" minimum insures larger browns, and there are also several catch and release areas on the river. A White River brown isn't considered large until it hits five pounds; it's not a trophy until it hits 10. To give you a frame of reference, on our last trip to the White, a fly shop owner showed us a picture of an honest, weighed and measured brown that he had just caught that weighed 29 pounds. He didn't seem all that excited about it.

7. Manistee River (Michigan)

Michigan's Manistee River is one of the best in the world. It starts deep in the lower Peninsula of Michigan as a small, spring-fed brook trout stream. This isn't the place to come for trophy trout, but the brookies are beautiful and jewel-like, always ready to provide a wonderful experience. A few browns do make their way into this section, and they can grow surprisingly large. While most people fly fishing, spin fishing is both legal and productive.
From the M-72 Bridge downstream to the CCC Bridge, the river is fly- fishing only. There are good numbers of both browns and brookies here, and trophies are much more common than further upstream. This is famous trout water, and the hatches, as well as the fish are plentiful. The restrictive regulations insure top quality fishing. The fishing remains good for a few miles downstream from the special regulation stretch (mostly for browns), before the river forms Tippy Pond.
Below Tippy Pond, the river is a mixed fishery. While smallmouth bass and pike are the main species during the summer, migratory trout, salmon, and steelhead form the cool-weather fishery. King Salmon and brown trout are present in good numbers during the fall. As a matter of fact, a brown trout caught in the lower Manistee last fall is the current world record. Steelhead are in the river mid-fall- mid-spring, and they are quite plentiful.

8. Connecticut River, (New Hampshire and Vermont)

The upper Connecticut River is an Eastern stream with a western feel. Coursing through the beautiful Appalachian country of Northern New England, the scenery will not be beat. The headwaters portion of the river flows through 3rd Connecticut Lake, 2nd Connecticut Lake, 1st Connecticut Lake, and Lake Francis. This portion of the river is full of eager brook trout, and in the spring and fall, Atlantic Salmon run upstream from all of these lakes, and provide excellent sport in the river. There is some water that is legal to fish with a spinning rod, but it's mostly fly fishing only.
Below Lake Francis, the river mostly becomes open to spin fisherman, although fly fishing is still most popular. The Connecticut provides excellent fishing for rainbow and brown trout for many miles downstream. You can wade, fish from the bank, or float this water. This area gives you your best shot to catch large trout. The fishing is good along the New Hampshire/Vermont border all the way down to Hanover, the home of Dartmouth College. It should be noted that there are several slow, dammed up sections of stream in this part of the river that are warm-water fisheries, but where you find good current, you'll find some trout.

9. Niagara River

Did you know that below Niagara Falls, this mighty river is an excellent trout and salmon stream? This is a totally migratory fishery with good numbers of steelhead, brown trout, and various species of salmon. As you may have guessed, this is not an easy river to fish. There are probably some areas that can be fished from the bank, but it would be safe to say that wading is out of the question. There are many guides in the area that will help you out on this beautiful, dangerous river, and we recommend their services to insure a safe trip. This isn't a summer fishery for the most part. Any time during the spring and fall, you'll find some sort of salmonid running up the river. In summer, switch your attention to smallmouth, which are abundant and large.

10. Beaverkill River

Is this one of the 10 best trout streams in the country? Well admittedly, it probably isn't. It's just that the tradition on this stream is so rich that it would seem a sin to leave it off. This famous Catskill River begins as beaver flowage high in the mountains. It's full of eager brook trout up there, and few folks fish it. This water is on public land, so if you'd like to hike in, you may be pleasantly surprised. The first place most people begin their fishing is at the Beaverkill Campground. Browns and brookies both reside in the beautiful fast water environment here, and it's always a pleasant place to fish. Also, it doesn't get nearly as warm in the summer as the lower reaches, so you can probably expect to catch a couple if you have to come in July or August.

The river is mostly private, and therefore off of our radar screen all the way down to Roscoe, New York (also known as Trout Town USA). At this point, the Willowomec (also a nice trout stream) flows in to form the Junction Pool. Many people come all the way out here just to fish that pool;it's synonymous with American dry fly fishing. After this pool, the river remains mostly accessible and has many other areas, such as Cairn's Pool, Horse Brook Run, Cook's Falls Pool, Horton Pool, and the Acid Factory that are legendary in the minds of fisherman. This is all famous trout water, and it fishes well whenever the water temperature is below 70 degree. Sometimes it will be in good, fishable shape all summer long, and at other times the water is so warm it is both irresponsible and unproductive to fish it.

There are only about 300 trout per mile on the Beaverkill, and given it's fairly large size, that's not a terribly high number. Neither is it much of a trophy stream, although admittedly some fine browns are caught from time to time. And therein lies the mystery to it's fame. It's real value lies in the fact that it was one of the streams where American dry fly fishing was pioneered. A trip here is more a lesson in history than an excursion to world class trout water.

These are just ten streams that for one reason or another, we think are worthy of mention. As we said earlier, it's highly debatable whether these are really the ten best. But it is true that these are ten fine trout streams, and they all have some aspects to them that are beautiful.

Davdison Manning is an avid outdoorsman spending over 100 days per year pursuing his passion for fishing, many of them in the Ozarks of Missouri and Arkansas. He details many of his favorite spots on his website Family-Outdoors. His other pursuits include many days spent in the field camping and hunting. Davidson loves to share his knowledge of the outdoors in the hope of helping others to find their own connection to the outdoors.
Article Source: http://EzineArticles.com/?expert=Davidson_Manning

Article Source: http://EzineArticles.com/3888646

Saturday, March 31, 2012

Spring Trout Fishing Tactics




When it comes to fishing for trout in the spring of the year everyone seems to be looking for that one thing that will give them "a leg up" over other fishermen. That one special bait or lure that will help them catch trout, when everyone else seems to be having a difficult time. Well, I have been fishing for trout for more than two decades and have found that more than the trout bait or lure that you are using, the tactic that you employ seems to make the most difference when it comes to experiencing springtime trout fishing success.
Below I will outline a few springtime trout tactics that should be employed by anyone who wants to experience more success when fishing for trout this spring. The spring of the year offers some unique challenges that fishermen don't necessarily have to deal with during other fishing seasons and those challenges would include competition (fishing pressure), high water conditions, and muddy water conditions. The good thing is that every one of the challenges can be overcome by employing the one or more of the trout tactics being outlined below.
  1. Use A Longer Fishing Rod - This springtime trout tactics is most prevalent when fishing for trout in rivers that are running higher than they normally do. You see, if you use a longer fishing rod than you normally would, being able to "feel" what is happening with your bait or trout fishing lure is much easier. For example, rather than using a standard five foot ultralight fishing rod (which under 'normal' water conditions is ideal for trout fishing) use a seven to seven and a half-foot ultralight rod instead. Although often overlooked, this simple springtime trout tactic will make you a much more successful springtime trout angler.

  2. Drifting "Mealies" - Meal worms are often thought of as an effective trout bait for ice fishing, but get forgotten as soon as the weather begins to warm up. Drift fishing with small hooks that are baited with "mealies" (meal worms) might be the most effective of the spring trout tactics being discussed in this article. A meal worm can be threaded onto a #8 or #10 fishing hook, in much the same way a jig body is threaded onto a jig head, results in an extremely realistic presentation that hungry spring trout find hard to resist.

  3. Micro Jigs - Another often overlooked trout bait are micro jigs, which means a jig that is from 1/100 to 1/32 of an ounce. These teeny jigs can be fished in lakes or rivers and are like little pieces of candy to hungry springtime trout. If you are going to fish micro jigs without the help of a slip bobber (which adds weight to the rig making casting these tiny jigs much easier) make sure that you are using long fishing rod and very light fishing line. Most experienced micro jig fishermen advise using two-pound test line when fishing micro jigs without the help of a slip bobber. In muddy water conditions, use a jig that has a white head and brightly colored body. This will mean that the jig is much more visible to hungry trout.
The bottom line is that the aforementioned spring trout tactics are all extremely effective and should be a part of every serious trout fisherman's fishing arsenal. If any of them aren't a part of yours, they should be added sooner, rather than later.
Trevor Kugler is president of JRWfishing.com, a website dedicated to ultra light fishing, with an emphasis on ultra light river fishing for trout. Check out our new blog focused on trout fishing tips and techniques to help you be more successful on the water: http://jrwfishing.blogspot.com
Article Source: http://EzineArticles.com/?expert=Trevor_Kugler

Article Source: http://EzineArticles.com/6892234

Personal Pontoon Boats - River Fishing



Do you enjoy strapping on your waders, grabbing you ultralight gear and heading out to your favorite river for a morning of fishing? I sure do. As a matter of fact there is no other type of fishing I enjoy more than fishing in the current of a flowing river. Sometimes the river only lets an angler travel so far though. I know on my favorite river, I can wade about a mile upstream and 2 miles downstream, and that's it. Because of the overgrowth along the bank and deep water, I simply can't travel any further. If you're an avid wade fisherman like I am, you've more than likely experienced this exact dilemma.

The solution to this problem is a personal pontoon boat. These things are like a float tube on steroids. To me a float tube is no fun at all. I feel as if I'm some sort of retarded duck floating around the water. That or I feel as if it's something that my 3 year old daughter should be doing, not a grown man. In any case, the point is that I don't care for float tubes, and a personal pontoon boat is a viable alternative.
Not only is it a viable alternative to a float tube, a personal pontoon boat is a solution to our river fishing dilemma. Obviously, high water will no longer be an issue, but neither will all of the brush on the bank. With a personal pontoon boat, you're floating the river. It's a beautiful thing. When you reach an area that looks promising, you simply pull over, step off of your seat, and begin fishing the area!

For fishing rivers such as I eluded to earlier in this article, personal pontoon boats are the perfect solution. You'll be amazed at the amount of river that can be covered. It's almost as if the use of one of these personal boats opens up whole new worlds of fishing possibilities. That's probably because that's exactly what a personal pontoon boat provides....entirely new areas (or worlds) to fish.

Trevor Kugler is Co-founder of JRWfishing.com Trevor has more than 20 years of fishing experience as well as 15 years of business experience. He currently raises his three year old daughter in the heart of trout fishing country....Montana.

Great Personal Boats and Pontoons... - http://www.jrwfishing.com/boats.html
Article Source: http://EzineArticles.com/?expert=Trevor_Kugler

Article Source: http://EzineArticles.com/534751

Friday, March 16, 2012

4 Great King Salmon Fishing Spots In Oregon


 
You can fish right through the year at Oregon with remarkable fishing experiences. Though this location is not as popular or well known like the other fishing areas of Alaska, Washington and Michigan of the United States, it offers fishing right through the year which is interesting enough. The most eagerly awaited event in Oregon is the annual King Salmon fishing which occurs annually when many King Salmons are caught. The vast coastline of Oregon which is over a hundred and eighty miles can be fished for king salmons right through. During the season more than 65,000 will be caught and some of these King Salmons can weigh up to thirty pounds or more.
Some of the very often visited hot spots for salmon fishing

1. Rogue River - this river is divided into three sectors like the lower, middle and upper sections and is thought to be a fishing enthusiast's paradise. Originating from the mountains of Crater Lake National Park, this is a 200 mile long river. The lower end of the Rogue River has exceptional prospects for spring and fall King as well as Silver salmon fishing. The lower end of the Rogue River has marvelous chances for fishing in the spring as well as the fall for King and Silver salmon angling. The water in the middle of the
Rogue River is not very rapid and offers wonderful chances for families to go fishing and rafting. Spinner and fly fishing are popular in these deep ponds with rock bottoms and eddies that mark this section of the river. The best months to fish here are between July to October. Salmon and Trout fishing are available in the upper sections of the river. You could also go hiking, camping or white water rafting here.

2. Rogue River Canyon - White water rafting, with the spectacular water movement, is more popular than fishing right through the canyon. However this is a wonderful place to experience and see. There are a few fly fishing chances towards the lower end of the Rogue River Canyon.

3. Oregon coast - Fishing for King Salmon is done in this part of Oregon most often. There are many guide charter services available here, but with the waters being calm one could go fishing without the assistance of a guide. In any case if it is your first visit then it is better that you have a guide. At Bookings Harbor, the locale of the Chetco River is predominantly well known for King fishing in the fall.

4. Gold Beach - It is in this part that the Rogue River flows into the coastal waters . One can fish for King Salmons here right through the year with most opportunities for the best fishing from March to July. King Salmon or Fall Chinook mainly run from August right up to October. Between the fall from the months of September to October you could also fish for Silver salmon.

The coast has the most number of hotels and stores where you could find accommodation or shop for supplies. This is one of the biggest boons at Oregon for Salmon fishing for visitors .There are several camping areas for camping in the day or for longer periods of camping by the coast for those fishing enthusiasts who want to have a feel of the out doors of Oregon too.

Abhishek is an avid Fishing enthusiast and he has got some great Fishing Secrets up his sleeves! Download his FREE 116 Page Ebook, "Fishing Mastery!" from his website http://www.Fishing-Masters.com/772/index.htm. Only limited Free Copies available.
Article Source: http://EzineArticles.com/?expert=Abhishek_Agarwal

Article Source: http://EzineArticles.com/1663120

Tuesday, March 6, 2012

Thursday, March 1, 2012

Spin Fishing For Trout With Streamers


Spin fishing for trout with streamers? This doesn't seem like something that is possible does it? After all everyone knows that a streamer is an artificial fly and in order to use a streamer as bait you need to be a "fly fisherman" right? What I'm trying to tell you is that you actually don't have to be a fly fisherman to fish with streamers and this type of artificial fly can actually be used while spin fishing.
In this article I will explain how to go about spin fishing for trout while using a streamer as bait. As a matter of fact I will outline a pair of techniques that can be employed by the average spin fisherman to use this very effective bait for trout. As a matter of fact many experienced trout fishermen claim that using streamers as bait while using spinning gear may actually be more effective than fishing for trout with streamers while using fly fishing gear.
A major key to both of these techniques is that a longer ultra light spinning rod than you might normally use is in order. You need a fishing rod that's in the neighborhood of seven to eight feet long. This will not only give you added casting distance, but will also aide in keeping in contact with (or "feeling") the streamer that's tied to the end of your line. With that being said, let's get down to business.
  1. The Bubble Technique - The bubble technique involves a piece of terminal tackle that is referred to as a casting bubble (sometimes called a fly fishing bubble). This small plastic sphere that looks much like a clear bobber has a plug running through the center of it that will allow water to enter the bubble itself when it is submerged beneath the water. When the plug it pushed in the opposite direction the water stops flowing, thus adding weight to the bubble which makes casting and retrieving a lightweight streamer much easier. There is no doubt that when spin fishing for trout with streamers the bubble technique is a "must know" for any spin fisherman who wants to use the extremely effective trout bait known as streamers.

  2. The Bullet Technique - The bullet technique involves using a bullet weight, just like the ones that bass fishermen use when making a Carolina rig. A bullet weight is slipped onto your line and a barrel swivel is then tied to the end of the line. A twelve to twenty four inch leader is now tied to the other side of the barrel swivel and your streamer is tied to the end of the leader. This rig can now be cast out and retrieved with a starting and stopping motion. The bullet technique is effective in both lake and river trout fishing scenarios. The size of the bullet weight will vary depending on water depth, current flow, etc. Experimentation will be necessary to determine the proper amount of weight for the particular situation that you are fishing in.
The bottom line is that if you fish for trout with traditional spin fishing gear, streamers can not only be used but can be used effectively and one or both aforementioned techniques should be added to your trout fishing repertoire sooner rather than later.
Trevor Kugler is president of JRWfishing.com, a website dedicated to ultra light fishing, with an emphasis on ultra light river fishing for trout. Check out our new blog focused on trout fishing tips and techniques to help you be more successful on the water: http://jrwfishing.blogspot.com
Article Source: http://EzineArticles.com/?expert=Trevor_Kugler

Article Source: http://EzineArticles.com/6914445